Plan an EV charger, heat pump and induction range as one electrical project, even if you will install them in stages. Your electrician needs the existing service information and the specifications for all planned equipment to assess capacity and compare practical options. Adding these appliances does not automatically mean every home needs a 200-amp service.
For homeowners in Delta, Surrey and the Lower Mainland, early coordination can reveal wiring routes, equipment decisions and trade responsibilities before purchases or finished-surface work lock in the plan.
Make one list of existing and future loads
Start with what the home already uses: space heating, water heating, cooking, laundry, EV charging, a hot tub, a suite or other substantial equipment. Then list what you want to add, replace or remove. Distinguish confirmed purchases from possibilities.
Provide manufacturer specifications for the heat pump’s outdoor and indoor equipment, including any supplementary electric heating. Include the EV charger model and the induction appliance’s installation information. Equipment names alone are not enough to select circuits or determine the complete load.
Understand the three questions your electrician is checking
Service capacity: can the incoming electrical supply support the assessed demand with the planned changes?
Panel suitability: is the existing equipment suitable, in acceptable condition and able to accommodate the required circuit arrangement?
Installation routes: how will wiring reach the parking space, heat-pump equipment and kitchen without avoidable disruption?
These questions are related, but they are not interchangeable. A sub-panel can provide additional circuit spaces without increasing incoming service capacity. Likewise, replacing a panel does not automatically increase the utility supply.
What information helps with the capacity assessment?
BC Hydro explains that an electrical contractor assesses the home’s load and that historical meter data may be useful for an accepted assessment method. Ask your electrician which information is needed for your property; a monthly bill total or the sum of breaker ratings is not a substitute for the assessment.
See BC Hydro’s guide to understanding home electrical capacity. The accepted method and the permit process depend on the project and the authority responsible for the installation.
Compare the options before choosing an upgrade
Use the existing service: where the assessment confirms adequate capacity and suitable equipment.
Choose suitable equipment and charging output: compare actual household needs with the proposed electrical demand.
Use compatible EV load management: a system may control charging within available capacity. It does not increase the service size or automatically solve other appliance loads.
Upgrade the service when needed: review utility coordination, equipment, installation routes and the longer-term plan.
Learn about Hundel’s EV load-management installations and electrical service upgrades. The appropriate recommendation follows the property assessment.
Coordinate the installation in stages
If the kitchen is being opened now and an EV is planned later, discuss future routes before walls or paving are finished. If the heat pump is first, obtain the complete HVAC equipment schedule before the electrical quote. Planned routes or spare provisions still need to be designed for the intended equipment; guessing conduit or circuit sizes can create rework.
Record who handles electrical work, HVAC installation, appliance connection, any gas disconnection, excavation and restoration. Ask what each stage includes and what remains a separate future cost.
Questions homeowners often ask
Can a 100-amp home have all three? Some homes may have workable options, but the rating alone cannot establish suitability. Existing demand, selected equipment, management options and site conditions determine the answer.
Will EV load management also power my heat pump? EV load management controls the EV charging load. The heat pump and any supplementary heating must still be included in the overall electrical assessment.
Should I purchase everything first? Obtain model information and proposed locations first, then coordinate the electrical review before committing to equipment that may be unsuitable for the property.
Bring the whole plan to Hundel Electric
Send your job location, equipment list, safely taken panel-exterior photos and proposed installation locations. Include future suites, hot tubs or a second EV even if those are later projects. Call 604-358-5549 or send your electrification plans.
For the electrical portion of the HVAC project, see our heat-pump electrical service. Hundel Electric Services Ltd. is based in North Delta, operating since 2007. TSBC licence LEL0201692.