Kitchen Renovation Electrical
Kitchen Renovation Electrician in Delta & the Lower Mainland
Electrical planning, rough-in and finishing for kitchen renovations across Delta, Surrey, Burnaby, Richmond, Vancouver and Langley. Coordinate appliance power, lighting and receptacles before cabinets, counters and finished surfaces are installed.
Hundel Electric works with homeowners, kitchen contractors and general contractors to turn a proposed kitchen layout into a practical electrical scope. We review the existing wiring, appliance requirements, panel space and access, then plan the work around the renovation schedule.
Talk directly with an electrician about the scope, access and next steps. Explore our electrical services or send your project details for review.
Project planning
Plan the electrical around the kitchen you are actually building.
Replacing cabinets in the same positions is different from moving a range, adding an island or converting from gas to induction. Early electrical planning helps identify what can be retained and what must change before cabinetry and tile restrict access.
Appliance circuits and induction ranges
Range, wall oven, cooktop, dishwasher, microwave and refrigerator requirements are reviewed against the selected equipment. An existing connection is not assumed suitable just because the new appliance fits the same opening.
Counter and island power
We coordinate receptacle locations with the cabinet layout, usable counter space, backsplash and island design. Required protection and placement are assessed against the applicable code and site conditions before wiring is concealed.
Task, accent and general lighting
Plan pot lights, pendants, under-cabinet lighting, dimmers and switching together. Driver locations, fixture dimensions, cabinet clearances and separate lighting zones are easier to resolve before finishing.
Existing wiring and panel capacity
A renovation may uncover older wiring or circuits shared with other rooms. We assess the affected wiring and added loads, explain corrections and determine whether new circuits or panel work belong in the quote.
What this service includes
Kitchen Renovation Electrical scope
- Kitchen electrical layout review and circuit planning
- Appliance wiring and dedicated circuits as required
- Counter, island and general-use receptacle changes
- Pot lights, pendants, under-cabinet lighting and controls
- Assessment of affected existing wiring and electrical protection
- Panel or sub-panel coordination when the scope requires it
- Electrical permit and inspection coordination where required
- Rough-in, fixture installation, testing and circuit identification
Scope and pricing
What affects the kitchen electrical quote?
Pricing depends on the number of new circuits and fixtures, appliance specifications, access from the panel, whether walls are open and the condition of existing wiring. Moving appliances across a finished room can be more involved than replacing them in place. Send the proposed layout first so the quote separates electrical labour and materials from fixtures, drywall repair and other trades.
Send your project information to request a quote, or call (604) 358-5549 to discuss the work.
Related electrical planning
Connect the kitchen plan with the rest of the home.
Adding electric cooking while also planning an EV charger or heat pump calls for a whole-home capacity review. We can explain whether the work needs additional circuits, a sub-panel or an incoming service upgrade.
Dedicated appliance circuits
Explore circuits for equipment that needs its own supply.
View service →Panel upgrades
Review panel condition, circuit space and replacement options.
View service →Lighting upgrades
Coordinate the kitchen with lighting in adjoining rooms.
View service →Whole-home renovations
Plan electrical work when the kitchen is part of a larger renovation.
View service →Relevant project experience
Residential electrical work from rough-in through finishing.
Hundel Electric has completed renovation, suite, custom-home and new-construction electrical work throughout Delta, Surrey and the Lower Mainland.
North Delta garden suite
Electrical planning and wiring for a detached garden suite with kitchen, living areas, bedrooms and mechanical equipment.
View garden suite project →Custom-home electrical
Full electrical planning, rough-in, lighting, panels, EV readiness and finish work for high-quality residential builds.
View custom-home service →Completed electrical projects
Review Hundel Electric projects across North Delta, Surrey, Burnaby, Vancouver and other Lower Mainland communities.
View all projects →Our process
How we handle your project
Speak with Manraj and the team about the actual equipment, property and schedule. We review the scope before work begins and discuss changes as conditions become clear.
Review the layout
We review the cabinet plan, appliance specifications, panel and existing kitchen conditions.
Agree on the electrical scope
We confirm circuit routes, lighting positions, controls, access and how electrical work fits the build schedule.
Complete rough-in
We coordinate wiring and required inspection stages with the contractor before walls and cabinets close access.
Finish and test
We install the agreed devices and fixtures, connect equipment within our scope, test operation and identify circuits.
Service areas
Kitchen Renovation Electrical across Delta and the Lower Mainland
Hundel Electric is based in North Delta. Choose your area for local electrical service information, or contact us with your address and project scope.
Questions & answers
Common questions about kitchen renovation electrical
Practical answers about planning, electrical scope, access and requesting a quote.
When should I contact an electrician for a kitchen renovation?
Ideally before cabinet and appliance orders are finalized. A preliminary layout lets us flag wiring routes, panel capacity and equipment requirements early. Final appliance specifications and cabinet drawings are needed before rough-in positions are confirmed.
Do I need a panel upgrade for an induction range?
Not automatically. We assess the selected range, existing circuit, incoming service and other household loads. A suitable existing supply may be usable, while other homes need new wiring, panel changes or additional service capacity.
Can you move outlets and switches when the cabinets move?
Yes. The new positions need to work with the finished cabinet, counter and backsplash layout and applicable electrical requirements. Open walls generally make changes simpler; finished surfaces and concealed obstructions can add work.
Can the existing kitchen circuits be reused?
Sometimes. We check their condition, arrangement and suitability for the new equipment and layout. Reusing a circuit depends on the assessment, rather than the fact that it powered an appliance in the old kitchen.
Do you install under-cabinet lighting and dimmers?
Yes. We plan wiring, controls and accessible driver locations around the selected fixtures and cabinetry. Confirm the lighting products before final wiring so the driver, dimmer and fixture combination can be checked for compatibility.
Does kitchen electrical work need a permit?
New circuits and wiring alterations generally require an electrical permit. We confirm the requirements with the authority responsible for the property and include the applicable electrical permit and inspection arrangements in the agreed scope.
Can you work with my kitchen company or general contractor?
Yes. We coordinate electrical rough-in and finishing with the build sequence, cabinet plan and appliance details. One current set of drawings and clear responsibility for changes help avoid conflicting instructions between trades.
Can you quote before demolition?
We can review plans and visible conditions before demolition. Hidden wiring, access restrictions or damage may only become clear after opening walls. The quote should explain its assumptions and how additional work will be discussed before it proceeds.
How much does kitchen renovation electrical cost?
The cost depends on circuit and fixture quantities, panel access, appliance loads, wiring condition and whether the layout changes. Send drawings and photos for a project-specific quote; a full kitchen rewire is a different scope from a few lighting changes.
Do you also repair drywall and install kitchen cabinets?
Our scope is the electrical work. Drywall repair, painting, cabinet installation and plumbing should be coordinated with the relevant trades unless separately agreed. We discuss access and likely openings before work starts.